Best wishes to you and your families this holiday season.

The post Merry Christmas appeared first on Ala Moana Eye Center.

Use your flex spending dollars and treat yourself to a new pair of eyeglasses. Treat yourself to a new pair of eyeglasses. You deserve it.

If you participate in a Flexible Spending Account at your job, you know you’ve gotta use up your funds or lose ‘um. Just a reminder… Flexible spending accounts (FSAs) expire December 31.

FSA dollars are great for:

That second pair of eyeglasses.
Prescription sunglasses that you’ve always thought about.
Spare contact lenses.
Getting rid of your scotch taped cheapy reading glasses and finally treating yourself to a nice pair of glasses.

The post Flex Spending Dollars? Use It. appeared first on Ala Moana Eye Center.

OOakley Overtime with OO Grey Polaroid lenses.

Built up nose pads provide a more comfortable fit.

This is Oakley’s first-ever active eyewear to employ 6 base lens curvature, Oakley Overtime offers remarkably clear peripheral vision.

Boldly designed square frames with delicately sculpted stems bring out the fashionable side of any athlete.

Oakley Overtime Polished Black with Grey Polaroid

The post Oakley – Overtime appeared first on Ala Moana Eye Center.

Happy Thanksgiving

Happy Thanksgiving from the eye doctors and staff of Ala Moana Eye Center.

Source: Eyepster.com

The post Happy Thanksgiving appeared first on Ala Moana Eye Center.

New Hawaii – Oakley Icon available at Ala Moana Eye Center.

The post New Hawaii Oakley Icon appeared first on Ala Moana Eye Center.

Eyeglass frame and two eyeglass blanks.

This is how we go about creating a great pair of eyeglasses.  Start with a couple of lens blanks and a frame. Making a lens blank with the correct prescription can take 2-14 days depending on the material used and power of the prescription. If the prescription of the lens blank is incorrect or there is a tiny, tiny, scratch…. WE START ALL OVER.

Right eyeglass blank lens.

Make sure the right lens goes in the the correct side of the frame. Reversing the lenses is a BIG, BIG, no-no. Block the lens correctly, or…. WE START ALL OVER.

Tracing an eyeglass frame.

Trace the frame to get a pattern of the lens shape. If we get a bad trace the lens shape will not fit into the frame. Bad frame = Bad trace = WE START ALL OVER.

Inputting the correct parameters for a perfect pair of eyeglasses.

Once the frame is traced, plug in all the correct settings to match the prescription. The distance between the two eyes and the height of the lens placement , how much curve is on the lens will dictate the placement of the lens bevel. All settings must be made correctly at this stage; any error in the calculations… WE START ALL OVER from the beginning.

Right eyeglass lens chucked and ready to be edged.

Now we chuck the lens and cross our fingers for a good cut. What can happen? Mechanical failure, cracked/shattered lens, lens can slip while cutting… any error here… WE START ALL OVER from the beginning.

Removing the eyewire screw from and eyeglass frame.

Start to disassemble the frame so we can insert the finished lens. Don’t lose those little screws. I have spent too much time crawling on the floor looking for a tiny screw. For some unknown reason screws have the capability of jumping many feet . Imperfections in the frame need to be corrected here… sometimes its easy to take a frame apart but, very hard to reassemble.

Lens edged to fit an eyeglass frame.

Aww shucks… came out a little big. Seems to be a little too big to fit in the frame. We must reinsert the lens into the edger and re-size the lens a little smaller in 0.5mm steps. If we get too aggressive and size the lens too small… Guess what? WE START ALL OVER from the beginning.. Yippee… after a little bit of resizing the lens fits perfect.

Hand edging the safety bevel on the right lens so it won’t chip.

The lens needs to be touched up by hand to have that perfect fit and finish. Almost done… can’t screw up here. Otherwise, WE START ALL OVER..

Slip the lens into the frame, wrestle with the frame and reinsert the tiny screw. OH YEAH! Don’t scratch that lens with the screw driver. Scratch the lens then we get to … START ALL OVER.

Verifying the lens to make sure the prescription is correct.

Check to be sure the prescription is correct and all landmarks are perfect. If the power is incorrect or the lens rotated while it was cut…. we can’t accept the lens and …WE START ALL OVER.

Hopefully, everything goes smooth (Murphy’s Law) and you are ALL PAU.

The post This is how we do it… Making a Lens 101. appeared first on Ala Moana Eye Center.

Our office will be closed on August 17, 2012.

Our office will be closed on August 17, 2012 for the Admission Day Holiday.

The post Closed for the Admission Day Holiday appeared first on Ala Moana Eye Center.

The new Oakley Crankcase in Matte Clear and Polished Rootbeer available at Ala Moana Eye Center.

Oakley lenses are cut from a single toric shield and placed in the frame to retain the original contour.

Oakley Crankcase in Matte Clear with Ice Iridium Lenses.

The post New Oakley – Crankcase appeared first on Ala Moana Eye Center.

The post Fact or Fiction? appeared first on Ala Moana Eye Center.

History Text Fuel Cell

The top Fuelcell is black and the lower sunglass has the History Text pattern.

This sunglass features black iridium lenses.

This sunglass features a nice wrap.

Even the back suface features the history of Oakley icons.

From a few feet away the History Text pattern makes the frame look gray.

Click on the picture to see the History Text pattern better.

The post Oakley History Text Fuelcell Available at Ala Moana Eye Center appeared first on Ala Moana Eye Center.

Please have a safe and enjoyable 4th of July.

The post Happy Independence Day appeared first on Ala Moana Eye Center.

Welcome back Dr. Tracie.   We are happy to have you back in the office.

The post Welcome back Dr. Tracie appeared first on Ala Moana Eye Center.